Tap the button below. It plays a low‑frequency sound that vibrates the speaker and pushes trapped water and dust out of the grille. Turn your volume up to about 80%.
💡 Point the speaker downward so gravity helps the water escape. Repeat 2–3 times if needed.
No download needed! This tool runs entirely in your browser, with nothing to install. We auto-detect your device below.
Dry the outside of your phone first.
Let gravity help pull the water out.
Ensure audio plays through the phone's internal speakers.
Never use earbuds. Turn volume up, but 100% isn't required.
Our tool is designed to target the three most common speaker issues using precise acoustic frequencies. Whether your phone took a dive or just sounds muffled from pocket lint, here is how we fix it.
Clear trapped water from your phone in about 60 seconds. The steady 165 Hz vibration physically pushes trapped liquid out of the speaker mesh.
A steady 165 Hz tone — the sweet spot for maximum diaphragm travel — physically pushes trapped water out.
Use our deep clean mode to act as a dust remover. Sweeping low frequencies shake loose stubborn dirt, sand, and lint.
Sweeps across low frequencies (120–400 Hz) to shake loose lint, dust and stubborn droplets the single tone misses.
Act as a volume booster for muffled speakers. Clear out blockages to restore heavy sound, loud bass, and crisp audio.
A clean 440 Hz reference tone so you can hear whether your speaker sounds clear again after cleaning.
Perfectly safe. These are ordinary frequencies your speaker already plays during music. The tool never exceeds normal listening levels — it just concentrates the energy at the frequency range where diaphragm travel is greatest.
There are many versions of this tool online and they mostly do the same thing. What separates a useful one from a useless one is narrower than it looks.
For a complete overview, see why nothing needs installing.
Almost every browser-based speaker cleaner uses the same underlying mechanism: an oscillator generating a low-frequency tone through the Web Audio API. Interfaces differ; the audio reaching your speaker generally does not. That means interface polish tells you very little about effectiveness.
Technique, by a wide margin:
Listen to the tone itself. With liquid present it often sounds slightly damped at first, then becomes clearly cleaner and louder partway through without you touching the volume. That change is the water releasing. A tone identical from start to finish across three cycles means nothing is happening.
No charging for 24 to 48 hours, however good the speaker sounds.
No. The frequencies used sit inside the range your speaker already reproduces whenever you play music, and the tool runs at moderate volume rather than maximum. The one genuine caution is earbuds: never run ejection tones into in-ear devices while you are wearing them.
No — and this matters. The sound has to travel through the blocked speaker to do anything, so any connected Bluetooth or wired device defeats the purpose entirely. Disconnect everything first.
For maintenance, roughly once a month is plenty. More often if you exercise heavily, work outdoors, or live somewhere humid or dusty. There is no benefit to daily use on a speaker that sounds fine.
Thirty to sixty seconds per cycle, repeated two or three times with short pauses. Running it continuously for many minutes adds nothing once the accessible liquid is out, and only heats the voice coil.
Playing an audio file does not modify your device or open it, so the tool itself has no warranty implication. Note separately that liquid damage is usually excluded from standard warranty cover regardless.
Our tool is great for water and dust, but it cannot fix physically blown speakers or electrical damage.
Learn when it won't workStep-by-step help for wet, muffled, crackling or quiet phone speakers.