Thirty to sixty seconds per cycle, repeated two or three times with short pauses. Running it continuously for many minutes adds nothing once the accessible liquid is out, and only heats the voice coil.
Tap the button below. It plays a low‑frequency sound that vibrates the speaker and pushes trapped water and dust out of the grille. Turn your volume up to about 80%.
💡 Point the speaker downward so gravity helps the water escape. Repeat 2–3 times if needed.
No download needed! This tool runs 100% in your browser. We auto-detect your device below.
Dry the outside of your phone first.
Let gravity help pull the water out.
Ensure audio plays through the phone's internal speakers.
Never use earbuds. Turn volume up, but 100% isn't required.
Our tool is designed to target the three most common speaker issues using precise acoustic frequencies. Whether your phone took a dive or just sounds muffled from pocket lint, here is how we fix it.
Clear trapped water from your phone in about 60 seconds. The steady 165 Hz vibration physically pushes trapped liquid out of the speaker mesh.
A steady 165 Hz tone — the sweet spot for maximum diaphragm travel — physically pushes trapped water out.
Use our deep clean mode to act as a dust remover. Sweeping low frequencies shake loose stubborn dirt, sand, and lint.
Sweeps across low frequencies (120–400 Hz) to shake loose lint, dust and stubborn droplets the single tone misses.
Act as a volume booster for muffled speakers. Clear out blockages to restore heavy sound, loud bass, and crisp audio.
A clean 440 Hz reference tone so you can hear whether your speaker sounds clear again after cleaning.
Perfectly safe. These are ordinary frequencies your speaker already plays during music. The tool never exceeds normal listening levels — it just concentrates the energy at the frequency that moves water best.
If you arrived looking for a download link, there is not one — and that is deliberate rather than an omission.
For a complete overview, see our full guide: Why there is no app to download.
Generating a tone requires an oscillator and an audio output. Every modern browser provides both through the Web Audio API. That is a small amount of code that runs directly in the page, so there is nothing to package, nothing to install and nothing to update.
This gives you app-like access with none of the installation cost:
The result is an icon that opens straight to the tool, without occupying meaningful storage or requesting any permission.
Once the page has loaded, the tone is generated on your device rather than streamed. If you expect to need it somewhere without signal — a beach, a pool, a boat — load the page beforehand and leave the tab open. Nothing is downloaded during a cycle.
A bookmark works fine. The home screen shortcut is simply faster to reach in a moment when your phone has just come out of water and you would rather not be navigating menus.
Speaker cleaning APKs distributed outside official stores frequently request permissions that bear no relationship to producing a tone — contacts, storage, location, device administration. A tool that plays a sound needs none of those. Treat any such installer with suspicion.
Technique. Case off, Bluetooth fully off, volume around 70–80 percent, grille facing straight down. Those decide the outcome far more than whether the tone came from an app or a page.
Thirty to sixty seconds per cycle, repeated two or three times with short pauses. Running it continuously for many minutes adds nothing once the accessible liquid is out, and only heats the voice coil.
Playing an audio file does not modify your device or open it, so the tool itself has no warranty implication. Note separately that liquid damage is usually excluded from standard warranty cover regardless.
No. The frequencies used sit inside the range your speaker already reproduces whenever you play music, and the tool runs at moderate volume rather than maximum. The one genuine caution is earbuds: never run ejection tones into in-ear devices while you are wearing them.
No — and this matters. The sound has to travel through the blocked speaker to do anything, so any connected Bluetooth or wired device defeats the purpose entirely. Disconnect everything first.
For maintenance, roughly once a month is plenty. More often if you exercise heavily, work outdoors, or live somewhere humid or dusty. There is no benefit to daily use on a speaker that sounds fine.
Our tool is great for water and dust, but it cannot fix physically blown speakers or electrical damage.
Learn when it won't workStep-by-step help for wet, muffled, crackling or quiet phone speakers.