No — and this matters. The sound has to travel through the blocked speaker to do anything, so any connected Bluetooth or wired device defeats the purpose entirely. Disconnect everything first.
Tap the button below. It plays a low‑frequency sound that vibrates the speaker and pushes trapped water and dust out of the grille. Turn your volume up to about 80%.
💡 Point the speaker downward so gravity helps the water escape. Repeat 2–3 times if needed.
No download needed! This tool runs 100% in your browser. We auto-detect your device below.
Dry the outside of your phone first.
Let gravity help pull the water out.
Ensure audio plays through the phone's internal speakers.
Never use earbuds. Turn volume up, but 100% isn't required.
Our tool is designed to target the three most common speaker issues using precise acoustic frequencies. Whether your phone took a dive or just sounds muffled from pocket lint, here is how we fix it.
Clear trapped water from your phone in about 60 seconds. The steady 165 Hz vibration physically pushes trapped liquid out of the speaker mesh.
A steady 165 Hz tone — the sweet spot for maximum diaphragm travel — physically pushes trapped water out.
Use our deep clean mode to act as a dust remover. Sweeping low frequencies shake loose stubborn dirt, sand, and lint.
Sweeps across low frequencies (120–400 Hz) to shake loose lint, dust and stubborn droplets the single tone misses.
Act as a volume booster for muffled speakers. Clear out blockages to restore heavy sound, loud bass, and crisp audio.
A clean 440 Hz reference tone so you can hear whether your speaker sounds clear again after cleaning.
Perfectly safe. These are ordinary frequencies your speaker already plays during music. The tool never exceeds normal listening levels — it just concentrates the energy at the frequency that moves water best.
“Online” here means it runs in your browser rather than as an installed app. It does not mean the sound is streamed — which matters if you are somewhere without signal.
For a complete overview, see our full guide: Why there is no app to download.
This is worth being clear about. Nothing is streamed during a cycle. Your browser creates the waveform locally using the Web Audio API, so once the page has loaded, the connection is irrelevant. Load it beforehand and leave the tab open if you expect to be without signal.
Any browser from roughly the last decade supports what this needs — Chrome, Safari, Firefox, Edge, and their mobile versions. There is no plugin, no Flash, and no extension required.
If a page fails to produce sound on a very old device, browser age is the likely cause rather than the page. Windows 7 machines in particular are stuck on older browser builds because modern Chrome and Firefox dropped support for that OS.
Browsers block audio that starts without a deliberate user interaction. You have to tap or click the start control — a cycle will not begin on page load. This catches people out on iPhone especially, where a silent page is often just waiting for the first tap.
The physics. Frequency range, volume, orientation and cycle timing decide the result regardless of how the tone was delivered. Case off, Bluetooth fully off, 70–80 percent volume, grille facing straight down at about 45 degrees.
Add it to your home screen — Share → Add to Home Screen on iOS, or the three-dot menu on Android. That gives you one-tap access without installing anything.
No — and this matters. The sound has to travel through the blocked speaker to do anything, so any connected Bluetooth or wired device defeats the purpose entirely. Disconnect everything first.
For maintenance, roughly once a month is plenty. More often if you exercise heavily, work outdoors, or live somewhere humid or dusty. There is no benefit to daily use on a speaker that sounds fine.
Thirty to sixty seconds per cycle, repeated two or three times with short pauses. Running it continuously for many minutes adds nothing once the accessible liquid is out, and only heats the voice coil.
Playing an audio file does not modify your device or open it, so the tool itself has no warranty implication. Note separately that liquid damage is usually excluded from standard warranty cover regardless.
No. The frequencies used sit inside the range your speaker already reproduces whenever you play music, and the tool runs at moderate volume rather than maximum. The one genuine caution is earbuds: never run ejection tones into in-ear devices while you are wearing them.
Our tool is great for water and dust, but it cannot fix physically blown speakers or electrical damage.
Learn when it won't workStep-by-step help for wet, muffled, crackling or quiet phone speakers.