No. Around 70 to 80 percent is the practical sweet spot. Maximum volume on a restricted diaphragm produces distortion rather than more displacement, and adds avoidable stress to the driver.
Tap the button below. It plays a low‑frequency sound that vibrates the speaker and pushes trapped water and dust out of the grille. Turn your volume up to about 80%.
💡 Point the speaker downward so gravity helps the water escape. Repeat 2–3 times if needed.
Select your issue and run the appropriate fix cycle to restore your speaker audio in about a minute.
Dry the outside of your phone first.
Let gravity help pull the water out.
Ensure audio plays through the phone's internal speakers.
Never use earbuds. Turn volume up, but 100% isn't required.
Our tool is designed to target the three most common speaker issues using precise acoustic frequencies. Whether your phone took a dive or just sounds muffled from pocket lint, here is how we fix it.
Clear trapped water from your phone in about 60 seconds. The steady 165 Hz vibration physically pushes trapped liquid out of the speaker mesh.
A steady 165 Hz tone — the sweet spot for maximum diaphragm travel — physically pushes trapped water out.
Use our deep clean mode to act as a dust remover. Sweeping low frequencies shake loose stubborn dirt, sand, and lint.
Sweeps across low frequencies (120–400 Hz) to shake loose lint, dust and stubborn droplets the single tone misses.
Act as a volume booster for muffled speakers. Clear out blockages to restore heavy sound, loud bass, and crisp audio.
A clean 440 Hz reference tone so you can hear whether your speaker sounds clear again after cleaning.
Perfectly safe. These are ordinary frequencies your speaker already plays during music. The tool never exceeds normal listening levels — it just concentrates the energy at the frequency range where diaphragm travel is greatest.
If you have come across this tool and want to know what it actually is before using it, here is the plain answer.
For a complete overview, see how browser delivery works.
A web page that plays a specific low-frequency sound through your phone's own speaker. Nothing is installed on your phone, no permission is requested, and nothing is recorded. It is not an app and not a repair service — it is a tone generator with a purpose.
A speaker produces sound by moving a thin membrane back and forth. At low frequencies that membrane moves further than at high frequencies. Each movement pushes air against any water or loose dust sitting in the speaker opening, gradually forcing it out. Apple uses exactly this method in the Apple Watch water-eject feature.
Yes, at normal volume. These are frequencies your speaker already produces whenever you play music — nothing unusual is being asked of the hardware. Two real cautions: never play it into earphones while wearing them, and do not use it on a speaker with visible physical damage.
Yes, and it costs nothing to provide. Generating a tone is a few lines of code that every browser already supports. Any tool charging for this is charging for packaging.
This matters as much as what it can do. It clears two things: water and loose dust. It does nothing for oil or wax, nothing for a torn speaker membrane, nothing for a broken wire or a damaged amplifier. If your speaker buzzes and gets worse as volume increases, or produces no sound at all, this tool will not help and continuing to run it wastes time.
30 to 60 seconds per cycle, two or three cycles for water. Dust takes longer — four or five passes. If nothing changes after three attempts, the problem is not blockage.
Do not charge a wet phone for 24 to 48 hours, even if the sound is perfect again.
No. Around 70 to 80 percent is the practical sweet spot. Maximum volume on a restricted diaphragm produces distortion rather than more displacement, and adds avoidable stress to the driver.
No. Rice is a poor desiccant — open moving air dries a device faster — and its starch dust migrates into the charging port, microphone holes and speaker grille, which can create a second problem on top of the first.
Stop. If three cycles produce no improvement at all, the cause is not blockage. Check the symptoms on our guide to when a sound tool will not help, and have the device inspected rather than continuing to run cycles.
No. The frequencies used sit inside the range your speaker already reproduces whenever you play music, and the tool runs at moderate volume rather than maximum. The one genuine caution is earbuds: never run ejection tones into in-ear devices while you are wearing them.
Thirty to sixty seconds per cycle, repeated two or three times with short pauses. Running it continuously for many minutes adds nothing once the accessible liquid is out, and only heats the voice coil.
Our tool is great for water and dust, but it cannot fix physically blown speakers or electrical damage.
Learn when it won't workStep-by-step help for wet, muffled, crackling or quiet phone speakers.