FREE · NO APP · WORKS IN YOUR BROWSER

How the tool works, and when not to use it

Tap the button below. It plays a low‑frequency sound that vibrates the speaker and pushes trapped water and dust out of the grille. Turn your volume up to about 80%.

Frequency 165 Hz Time left 0.0 s

💡 Point the speaker downward so gravity helps the water escape. Repeat 2–3 times if needed.

🔧

Speaker Fix Tool

Select your issue and run the appropriate fix cycle to restore your speaker audio in about a minute.

Preparation

Before you start

🧻

Wipe visible water

Dry the outside of your phone first.

🔽

Speaker facing down

Let gravity help pull the water out.

🎧

Disconnect Bluetooth

Ensure audio plays through the phone's internal speakers.

🔊

Volume around 70-80%

Never use earbuds. Turn volume up, but 100% isn't required.

Core Features

Fix My Speaker Functions

Our tool is designed to target the three most common speaker issues using precise acoustic frequencies. Whether your phone took a dive or just sounds muffled from pocket lint, here is how we fix it.

Hover over the cards below to see the effect
💧

Eject Water

Clear trapped water from your phone in about 60 seconds. The steady 165 Hz vibration physically pushes trapped liquid out of the speaker mesh.

Eject Water

A steady 165 Hz tone — the sweet spot for maximum diaphragm travel — physically pushes trapped water out.

🧹

Clean Dust

Use our deep clean mode to act as a dust remover. Sweeping low frequencies shake loose stubborn dirt, sand, and lint.

Deep Clean

Sweeps across low frequencies (120–400 Hz) to shake loose lint, dust and stubborn droplets the single tone misses.

🎵

Restore Volume

Act as a volume booster for muffled speakers. Clear out blockages to restore heavy sound, loud bass, and crisp audio.

Test Sound

A clean 440 Hz reference tone so you can hear whether your speaker sounds clear again after cleaning.

Perfectly safe. These are ordinary frequencies your speaker already plays during music. The tool never exceeds normal listening levels — it just concentrates the energy at the frequency range where diaphragm travel is greatest.

Two questions come up most often: is this safe for my phone, and will it actually work for my problem. Both have clear answers.

For a complete overview, see the physics behind the tone.

How it works, in one paragraph

Your speaker has a thin membrane that moves back and forth to create sound. Low sounds make it move a long distance; high sounds make it move barely at all. That long movement acts like a small pump, pushing air against water sitting in the speaker opening until the water is forced out. Point the speaker downward and gravity carries the water away instead of letting it fall back in.

Is it safe for the phone?

At moderate volume, yes. The sound used sits well within the normal range your speaker produces every time you play music or a video. Nothing unusual is being demanded of the hardware, and there is no electrical or software change to your phone.

Three situations where you should not use it

Will it work for your problem?

Ask yourself what the sound is like. If it is quiet and unclear but complete — everything is still there, just muffled — that is blockage and this will help.

If it buzzes and gets worse when you raise the volume, that is a torn membrane. If there is no sound at all, that is a broken wire or dead component — blockage makes sound quiet, never completely silent. Neither responds to any tone.

How many times should you run it?

Two or three cycles for water, four or five for dust, with a pause and a wipe between each. If nothing has changed at all after three attempts, more attempts will not start working.

FAQ

Common questions

Can this damage my speaker?

No. The frequencies used sit inside the range your speaker already reproduces whenever you play music, and the tool runs at moderate volume rather than maximum. The one genuine caution is earbuds: never run ejection tones into in-ear devices while you are wearing them.

How long should I run it?

Thirty to sixty seconds per cycle, repeated two or three times with short pauses. Running it continuously for many minutes adds nothing once the accessible liquid is out, and only heats the voice coil.

Should I set volume to maximum?

No. Around 70 to 80 percent is the practical sweet spot. Maximum volume on a restricted diaphragm produces distortion rather than more displacement, and adds avoidable stress to the driver.

Does the rice trick work?

No. Rice is a poor desiccant — open moving air dries a device faster — and its starch dust migrates into the charging port, microphone holes and speaker grille, which can create a second problem on top of the first.

It is still muffled after several tries. Now what?

Stop. If three cycles produce no improvement at all, the cause is not blockage. Check the symptoms on our guide to when a sound tool will not help, and have the device inspected rather than continuing to run cycles.

What this cannot fix

Our tool is great for water and dust, but it cannot fix physically blown speakers or electrical damage.

Learn when it won't work
HOVER TO BREAK HARDWARE DAMAGE

Speaker fix guides

Step-by-step help for wet, muffled, crackling or quiet phone speakers.

Specific Fixes & Tools